FlySpoke
Smolt
"In your grandfather's day there were salmon you could walk on their backs" The Poozies
Posts: 138
|
Post by FlySpoke on Dec 14, 2013 13:08:47 GMT -5
The start of any, from the dangle, two hand cast is to make sure that all slack is out of the system. Slack that must be eliminated by using part of the lift is a delayed transfer of energy from body to rod to line. Slack in the lift can even become slack at the beginning of the sweep. The first upward movement or lift is used to clear line in the surface tension to make our next move easier and afford the ability to make a well placed and properly shaped anchor set.
The shotgun lift is that basic move to get things fluid. Other lifts like crescent, cut and spiral are more dynamic and can be effective in situations that need a bit more energy or a change of position of the line. The shotgun lift is made with a short power move and followed straight up with an appropriate tempo. There needs to be variation in the power, tempo and height of the lift determined by river condition. A flat mid section of a pool might require less power on the lift that say the faster moving tail out.
The key to any well executed lift is the judgement of power required to make the line free to move upward and transition to the sweep without a stop. This is where power to tempo transforms to the dramatic power at the start of your sweep. Use your lift wisely and concentrate on the ability to get your casting to feel continuous from it's very first movement till you follow through back to the water.
|
|